Can an RTX 3060 fit in a micro ATX motherboard?
Some micro ATX cases are slim, HTPC, or low-profile cases, and will not fit any RTX 3060 Ti, even the smallest ones. Some micro ATX cases are wide tower cases, and could fit any RTX 3060 Ti, even the largest ones.
Most modern micro-ATX cases should be able to fit most graphics cards out on the market today - including the more common 2-fan variants. The exception would be the really long 3-fan GPU or cases with non-removable drive cages positioned low enough to block the pcie slot.
Some will Some won't. You will find plenty of MATX cases that will take a 3070 but not all 3070's will fit in every MATX case out there.
It is compatible with 360mm, 280mm, and 240mm radiators. The dimensions of this case are 272mm x 446mm x 445mm. All these features make it perfect for building a high-end PC with RTX 3080 and RTX 3090 GPU.
Being a dual-slot card, the NVIDIA GeForce RTX 3080 draws power from 1x 12-pin power connector, with power draw rated at 320 W maximum. Display outputs include: 1x HDMI 2.1, 3x DisplayPort 1.4a. GeForce RTX 3080 is connected to the rest of the system using a PCI-Express 4.0 x16 interface.
A: Yes, it will fit!
It should. It is a full size case.
The chassis has two expansion slots, one USB-C 3.2 port, two USB 3.0 ports, and two HD audio ports. It supports a top fan, rear fan, and top of the PSU cover fan. This mini ITX case has a triple tempered glass panel to show off your build and is big enough to fit an NVIDIA RTX 3090.
This card will NOT fit into a Micro ATX Case. That would be like trying to shove a semi into a one car garage...
If you want to build a budget-friendly gaming PC, your best bet is to go with a micro-ATX motherboard. The reason being is that, no components are going to have as big of an impact on your in-game performance as will your graphics card, processor, and memory.
Are the 3070 and 3080 the same size?
GeForce RTX 3080 is 43 mm longer, than GeForce RTX 3070. Memory clock speed of GeForce RTX 3080 is 5000 MHz higher, than GeForce RTX 3070.
Yes, it can barely fit but if you will have to pay close attention to your front fans and or radiator as the nearly 12″ length of that video card will encroach on that space so it will be a very close fit depending on your installation intentions behind that front panel.
The 3080 is overkill within this resolution unless you have a super-powerful monitor with at least 140Hz. If you care to use the 3080 GPU in this range, you can easily push over 100FPS even in the most demanding games.
- CPU Cooler: NZXT Kraken Z73 RGB. ...
- Motherboard: MSI MPG Z690 Force WiFi. ...
- RAM: Corsair Vengeance RGB DDR5. ...
- SSD: Seagate FireCuda 530 1TB. ...
- GPU: MSI Suprim X RTX 3080. ...
- Case: Corsair iCUE 4000D RGB Airflow QL. ...
- PSU: Corsair RM850.
Most manufacturers and computer resellers can tell you whether a graphics card is compatible with your computer. This information is often listed online and in the computer's technical specifications or the card's specifications.
As it turns out, some of the new 30-Series GPUs require two of the PCIe 8-pin connections (otherwise known as “6+2” connectors), while others require three – and even within the 3080 product line specifically, the power connection needs vary depending on the specific card.
Indeed, a cursory check of the specifications of the RTX 3080 Founders Edition reveals that the card requires two PCIe 8-pin connectors. Conversely, NVIDIA refers to the card as having a "new 12-pin power connector" in one graphic, albeit it has hidden this text somewhat.
Theoretically yes, but it would be pushing this power supply. First, you want a 3rd party 3080 that is not using the 12 pin power connector. Those should have two eight pin PCIe power connectors. Your 6+2 pin cable should work there.
As for pure advantages over the ATX, Micro-ATX takes up less space and can be used in a smaller PC case as a result. The smaller form makes the average cooling and airflow setup more efficient.
Even the tiny mATX motherboards will accept a GTX 1660 Ti and most pre-built gaming PCs from the last few years should be good to take one as an upgrade.
Can ITX GPU fit in mATX?
Will I be able to use an ITX GPU with a microATX motherboard? Yes. A graphics card being marketed as “ITX” just means the card is shorter than a full-length graphics card, so it can fit into smaller cases. It is otherwise identical to a normal graphics card, and will work with any motherboard with a PCIe slot.
The AMD Ryzen 9 5950X is a killer CPU that will have no issues keeping up with the RTX 3080. 16 cores, 32 threads, and a boost speed up to 4.9GHz with 105W TDP.
Meet the GeForce RTX 3080 Ti X3 OC. Due to rather high power consumption of GPUs based on the Ampere architecture, Nvidia had to install 2.5-wide cooling systems on its Founders Edition graphics cards.
The Gigabyte Aorus X570 is a great motherboard because it has many great features and supports AMD's PCIe Gen 4.0. It is the best motherboard for the newer RTX 3080 and works well for any AMD build. The RTX 3080 is a fast card, and pairing it with the Gigabyte lets you use all of its power.
The NVIDIA GeForce RTX 3080 is still the best graphics card overall, with the EVGA XC3 Ultra measuring just under 286mm. It'll be a squeeze for a Mini-ITX PC case but still a realistic choice when paired with proper cooling.
You will have no issues installing any RTX 3070 inside a mid-tower case. The maximum length of RTX 3070 is 335mm (MSI Supreme X). This 3070 can easily get fit inside any mid-tower PC case.
It does.
The micro ATX form factor is the most popular size for a PC, and it's easy to see why. Micro ATX cases are small enough to fit into tight spaces while still providing enough room for most components. If you're building a gaming PC or a workstation with multiple hard drives, you'll probably need a micro ATX case.
Can All GPUs Fit All PC Cases? They absolutely cannot. It is imperative to understand the physical limitations and constraints of your PC case before going out and buying any kind of graphics card.
...
- You'll have fewer PCIe slots. ...
- Some micro ATX cards will only give you 2 slots for RAM. ...
- M.
Why are Micro-ATX cheaper?
Micro-ATX boards are generally cheaper because they simply include fewer components to their design. ATX boards having to accommodate more inside one board brings the price up. That said, an ATX board might be the right choice for you if you need a lot of what it offers.
Micro ATX motherboards might be great for saving you a bit of space and are often cheaper than full-sized ATX motherboards, but you should know you're making a few sacrifices. Chiefly these smaller boards often come with fewer PCIe slots—or even just one on certain models.
The RTX 4080 has some impressive efficiency for the performance that it's putting out, handily beating the RTX 3080 without compromise. Both share the same TDP of 320 watts, demonstrating how impressive the RTX 4080 is when considering it is often double or more the performance metrics versus the RTX 3080.
The 3080 seems to be a good performer when it comes to 4K gaming, and is worth picking up if you're planning on maxing out your settings.
The obvious answer is no, you don't need one, but there are some cases where it might make more sense to want one, so lets take a look at them. If you are playing at 1080p, unless you are using 240 or 360Hz monitors, you don't really need more than an RTX 2080 or GTX 1080ti, give or take.
To use the RTX 2060, which is still a very good GPU for gaming and working, we need to make sure to pair it with a CPU on a similar level to avoid bottleneck issues. Enter the Ryzen 5 3600X. This processor has been the go-to processor for many gamers and PC enthusiasts since its release in 2019.
NVIDIA RTX 2060/GTX1660 are no longer produced. According to BoardChannels' sources, NVIDIA has announced a discontinuation of RTX 2060/GTX 1660 series. This is actually the second time the same source is claiming the end of the mid-range Turing series.
Note: The GeForce RTX 2060 SUPER card is double-wide and requires removing two slot covers. Plug the GeForce RTX 2060 SUPER graphics card into the Primary PCI Express x16 slot on your motherboard. This is often the slot closest to the CPU but may be the second or third slot. Look for the slot labeled ×16.
We said in the RTX 3080 review that it's a card primarily designed for 4K gaming, and that it starts to hit CPU bottlenecks at 1440p. That applies even more at 1080p with medium settings.
80c is warm but is within spec as max temp for the Nvidia RTX 3080 is 93c.
How much FPS can a 3080 run?
GeForce NOW RTX 3080 members will have exclusive access to the new servers, streaming at up to 1440p at 120 FPS on PC, 1600p at 120 FPS on most MacBooks, 1440p at 120 FPS on most iMacs, 4K HDR at 60 FPS on NVIDIA SHIELD TV and up to 120 FPS on select Android devices.
Any motherboard with a PCIe slot will be compatible. You will get the best performance with a motherboard that supports PCIe version 4.0, but the advantages over PCIe 3.0 are negligible (typically under 2–3%). It's much more important to make sure you get a good CPU than PCIe 4.0.
If your computer has PCIE 3.0 atleast it should be compatiable with RTX3080. It might be a bit limited in terms of bandwith but you should be able to run it. Check the motherboard information and look it up online to find the specs. Most computers built in the last 10–12 years should be able to support it.
| RTX 3080 Ti | RTX 3080 | |
|---|---|---|
| NVIDIA CUDA Cores | 10240 | 8960 / 8704 |
| Boost Clock | 1.67 GHz | 1.71 GHz |
| Memory Size | 12 GB | 12 GB / 10 GB |
| Memory Type | GDDR6X | GDDR6X |
Pretty much all graphics cards are compatible with about 95~99% of all motherboards. If your motherboard has a PCI-E x16 slot, it's likely that a graphics card will work on it.
The one you want to look at is “CPU Impact on FPS,” which should be 10% or lower. This number will tell you whether a mismatch between CPU and GPU is causing a bottleneck, and whether upgrading either component will resolve the issue.
If two cards from the same NVIDIA or AMD product line are of the same model, and they can fit inside your computer's case and plug into your motherboard, there's not going to be a massive difference in how they make your games look.
Identifying the best motherboards for RTX 3060 GPUs can be a challenge. Any motherboard with a PCIe x16 slot will support any GPU, be it a GT 710 or an RTX 3090 Ti.
Yes, this case will fit a standard size ATX motherboard AND a 3 fan GPU (lengthwise).
6 cores, 12 threads and the B550 board supports PCIe gen 4 which will be utilized by the RTX 3060. (You can also go with the new Ryzen 5 5600X but I'm pretty sure they're all out of stock.) If Intel then I'd go with the Core i5 10400 or the new 11th gen Core i5 11400. The motherboard would be a B560 LGA 1200.
What slot does the 3060 fit in?
GeForce RTX 3060 is connected to the rest of the system using a PCI-Express 4.0 x16 interface. The card measures 242 mm in length, 112 mm in width, and features a dual-slot cooling solution.
Any motherboard with a PCIe slot will be compatible. You will get the best performance with a motherboard that supports PCIe version 4.0, but the advantages over PCIe 3.0 are negligible (typically under 2–3%). It's much more important to make sure you get a good CPU than PCIe 4.0.
The good news is that most modern GPUs are compatible with almost any motherboard from the last decade. Even so, it's better to be safe than sorry. You will only need to check for graphics card compatibility if you're getting a dedicated GPU.
While NVIDIA's GeForce RTX 3070 GPU works just fine with PCIe 3.0 slots, it's best to grab a motherboard with a PCIe 4.0 slot to make the most of its graphical prowess. We've rounded up the best motherboards with PCIe 4.0 slots for both AMD and Intel processors.
This card will NOT fit into a Micro ATX Case. That would be like trying to shove a semi into a one car garage...
The two things you simply have to keep track of are the length of your graphics card and also its width. The first part is the easiest one to understand as it's wholly logical; you can't fit in a GPU that's longer than your case. It's really that simple.
This week, Galax introduced its gamer focused GeForce RTX 3060 Metal Master Mini card that can fit into even the smallest Mini-ITX systems.
This graphics card was launched in 2021 as a performance-focused 1080p gaming GPU and is a successor to the extremely popular GTX 1060 and RTX 2060 family of GPUs. Theoretically, the RTX 3060 is a solid option for the average gamer.
AMD Ryzen 9 5950X
In conclusion, the best CPU for the RTX 3060 depends on your budget and what you plan to do with it. For those who want the best performance, AMD's Ryzen 9 5950X is a great choice. If you need something more affordable, Intel's Core i5-11600K is a great budget option.
As a mainstream card, the RTX 3060 primarily targets 1080p and 1440p gaming. Some lighter games may also run fine at 4K, or in some cases, you could shoot for 4K at medium settings. But despite having more VRAM than even the RTX 3080, frame rates definitely take a hit at the highest resolutions.
What slot does a 3090 need?
Being a triple-slot card, the NVIDIA GeForce RTX 3090 draws power from 1x 12-pin power connector, with power draw rated at 350 W maximum. Display outputs include: 1x HDMI 2.1, 3x DisplayPort 1.4a. GeForce RTX 3090 is connected to the rest of the system using a PCI-Express 4.0 x16 interface.
NVIDIA GeForce RTX 3080 10GB GDDR6X PCI Express 4.0 Graphics Card - Titanium and Black.